Using some gorgeous papers from Papertemptress along with my Scor-Pal, I created the card base (3 1/2" x 9"). Clearsnap has some amazing tools and inks, so using Stephanie Barnard's Tangerine Ink and the Butterfly Garden Rollagraph Wheel, I stamped the butterfly pattern on cardstock and then embossed it with Clearsnap Clear Embossing Powder.
To create the 3 panels, I cut apart the design and matted each piece on orange cardstock. A small strip of brown cardstock was placed on the card and wrapped with twine, then the 3 panels were added with foam adhesives.
Don't always take your stamps at face value - change them up a bit - you never know what you'll create!!
Ink: Stephanie Barnard Tangerine
Embossing Powder: Clear
Rollagraph: Butterfly Garden
Scoring Tool: Scor-Pal
Twine: Mandorin, The Twinery
Kreaxions punches can create some wonderful projects and if you have tons of scraps like I do, it's so easy to use these punches to create border strips. So just dig out your scraps and punch away.
I used punch #907 and punched a number of strips. I layered them on my backgound piece so the punched pieces would almost appear to be a quilt-like design. I sewed around the edges to keep all the layers in place.
The butterfly was then cut and embossed with a Cuttlebug embossing folder and added to the card with foam adhesives. A trail of rhinestones completes the card.
Cardstock: Bazzill, Crate Paper, DCWV, K&Co
Punch, Die: Kreaxions
Using Eclipse Black and Double Duty Pink, along with my Scor-Pal, I created a Z-Fold card. The card measures 5 1/2″ x 11″, but the top panel has been scored, then folded to create the Z-Fold. The Scor-Pal makes scoring and folding so much easier, especially when you are working with a heavier cardstock as I am here.
I embossed the 2 smaller pink panels with a Cuttlebug embossing folder, then I lightly inked the edges with some Clearsnap Ink before adhering. On the larger panel, I stamped flowers from Justrite Stampers around the panel, then “painted” the petals with some Clearsnap Smooch Ink.
The labels were die cut with Spellbinder Nestabilities dies from both pieces of cardstock. The edges of the pink layer were again inked with Clearsnap Ink.
The butterfly is a Sizzix die that was cut from scoreboard, inked and embossed. The inner most layer of the butterfly was seperately inked, embossed and placed between the layers. I added some dimension adhesives to give the butterfly some height.
Stamps: Justrite Stampers
Die and matboard: Sizzix
Check out today's Scor-pal post for my spooky house card.
I chose to create this Halloween card. The UCutIt Foam Adhesive is amazing!!! It cuts like a dream and, as you can see, it can be used in a die cut machine.
Scoring Tool: Scor-Pal
Adhesive: Glue Arts
Pattern paper, ribbon: Making Memories
Die Cut: Sizzix
Ink: Clearsnap Black Mix'd Media Inx
Foils: Clearsnap Lucky Penny Foil
Glitter: Clearsnap Charcoal and Silver Lining Glitter
Twine: The Twinery
Metal Tag: Miss Elizabeth
I chose to color her with Copic Markers in traditional Halloween colors. Then I purposely die cut her off center so I would have room for brads and a sentiment. I lightly inked the outer edges of the die cuts with Clearsnap's Honey Mix'd Media Inx.
The background paper is by GCD and I chose to emboss it with my Cuttlebug Swiss Dots Embossing Folder. I then lightly inked the embossed areas with Clearsnap's Honey Mix'd Media Inx (love this stuff!).
Pattern paper: GCD
Stamps: Hambo, Hero Arts
Die cuts: Spellbinders, Nestabilities
Markers: Copic Markers
Brads: Making Memories
Justrite Stamps was the perfect sentiment and fit perfectly in the label die.
I used Clearsnap's Truffle Mix'd Media Inx as well as the new Decades Venetian Lace (only available through Hampton Arts).
Pattern Paper: Graphic 45
Stamps: Justrite You are my Anchor
Ink: Clearsnap Mix'd Media Inx, Decades Ink
Dies: Spellbinders Nestabilities
I used Punch 902 in conjunction with the Punch Mate along the edge of the yellow Glitter Paper. The Punch Mate makes it so easy to use any number of punches. I then sized the glitter paper to fit my card and inked the edges. I trimmed the card about 1/2" to allow the punched edge to show, then placed a strip of brown cardstock underneath. This allowed the punched edge to really pop.
Just above the punched edge, I scored several lines for some dimension. I then stamped my sentiment within those scored lines. Some twine was wrapped around the upper section of the card. The butterflies were created using Clearsnap's Design Adhesives and Designer Foils. This piece was inked and matted on brown cardstock, then added to the card wth foam dots.
Then I just added some pearls to the punched edge.
Cardstock, Punch: Kreaxions
Ink: Clearsnap Chestnut Roan
Score Tool: Scor-Pal
This month's Challenge colors are Eggplant, Olive, and Aqua.
Now if you don't have these colors, choose something close and then upload your project the Clearsnap blog .
Here's my card:
I started with white cardstock cut to fit my Cuttlebug Embossing Folder. Then I gently wiped the colors randomly across the paper and then spritzed it with Vanilla Shimmer Smooch for a little shimmer. This created a nice background for the embossed words. Some coordinating cardstock colors, a stamped sentiment and a flower were all that was needed to finish this card.
Mix'd Media Inx in Black
Smooch Spritz in Vanilla Shimmer
Petal Point Inks in Aurora
Petal Point Inks in Primary Pastel
Cuttlebug Embossing Folder
American Crafts Stamp
Our teams have come together to show you ALL of the amazing things you can do with Unity Stamp Company stamps and Scor-Pal products!
Along the blog hop you will find cards and projects that are sure to INSPIRE you!
Oh and we have prizes, too, so BE SURE to leave a comment on ALL of the blogs on today’s Blog Hop! There will be 2 winners! 1 will get a Scor-Pal and 1 will get 10 Unity Itty Bitty stamps of their choice! Winners will be picked from ALL of the comments so the more comments you leave, the more chances you have to WIN!
The winners will be announced on Thursday, September 15th on the Unity Stamp Company blog and the Scor-Pal blog!
Today I'm sharing with you an easel card.
Using my Scor-pal, this shaped card was so easy to create. I cut my card from Core-dinations cardstock using Spellbinders Grand Calibre Scalloped Circle Dies, being sure a small section of the cardstock did not cut, thus creating a card. I scored the top panel at 7 1/2" and 8 1/4" to create the folded section of the card which would become the easel.
I folded this section and used Scor-tape to add a seperate Scalloped Circle on top, lining up the scallops.
I added a smaller circle on the card base, inked the edges and stamped butterflies from the Unity Stamp set using Clearsnap's Mix'd Media Inx which I then embossed with clear embossing powder.
I stamped the Lemonade Stand on Cryogen White cardstock and colored it with Copic Markers, then cut it out as I wanted it 3 dimentional. Since I wanted to add a small image behind the Lemonade stand, I cut out the center. The mini Magnolia image was also colored with Copic Markers and cut to fit behind the Lemonade stand which was adhered with foam adhesive squares. Before assembling the card, I added some twine behind the layers.
Thanks for stopping by. Remember to leave a comment on each blog for your chance to win some amazing prizes.
Your next stop on the blog hop is: Christi Snow.
In case you get lost, here's a complete list of the blog hop:
Unity Stamp Company
Cardstock: Core-dinations, Cryogen
Scoring Tool: Scor-Pal
Stamps: Unity Stamps - Lemonade Stand; Mini Magnolia
Inks: Clearsnap Mix'd Media Inx
Embossing Powder: Clearsnap Top Boss Clear Embossing Powder
Pattern paper: K&Co.
Twine: The Twinery
Markers: Copic Markers
Using a small gift bag from the local craft store, I decorated it with pattern paper and a Cuttlebug Embossing Folder, allowing "friends" to show. After inserting the gift card, I tied the bag together with ribbon. Then I used the Butterfly die on a large manilla tag. I cut the butterfly from cardstock and the same pattern paper I placed on the gift bag. I ran this layer through my Cuttlebug, then inked the embossed section. After placing the cardstock butterfly on the tag, I used foam adhesive to adhere the second layer, then added some pearls down it's center.
Check out the store for this butterfly die and some amazing punches.
Pattern paper: MyMindsEye
Ink: Clearsnap Mix'd Media Inx
Stamps: Magnolia, MyStampBOX
Markers: Copic Markers
Proud to be MADE IN THE USA Blog Hop
Did you know that all Clearsnap Products are manufactured right here in the United States, at our headquarters in Burlington, WA? They are! Every inkpad is made right here under our loving, careful guidance so that it will be the best quality possible when it reaches your craft table (and for years to come).
To celebrate Clearsnap's commitment to manufacturing products in the USA we have released a Limited Edition 3 Color Pigment Inkpad, MADE IN USA. Our Design Team has created stunning projects with this inkpad to share with you today, Labor Day! This inkpad has only been available to retailers purchasing inkpads and distinctive accessories direct from Clearsnap, as a "thank you" for their support of our company.
But we're giving one of these inkpads away!!! Please visit all of the blogs listed below as part of today's blog hop and leave a comment on each blog. Each comment counts as an entry into the drawing. Comments must be posted by midnight 9-5-11 PST to be eligible for the drawing. A winner will be posted to the Clearsnap Blog on 9-6-11.
Stephanie Ackerman HERE
Mary Dawn Quirindongo
Today I am sharing with you how to create your own background using this 3 color stamp pad. Take a sheet of white cardstock (or the back of some pattern paper you don't like) and swipe the USA ink pad across the paper as often as needed to cover it.
It dries quickly and soon I was able to create this invitation. I cut the backgound 4"x6", inked the edges with the blue ink in this trio, then matted it with red cardstock. I then tied some twine around the block and die cut my other elements using my Cricut Expression. I cut the starred paper 5 1/4" x 7" and also inked it with the blue ink in this trio. Adhering the invitation on top, I added a 1" topper, punched two holes in it and tied a ribbon.
With the left over paper, I decided to create a journal. I die cut the title from the same background paper I created earlier, using my Cricut Expression.
I cut a block of pattern paper to fit the front of my journal and I added the title to the center, surrounding it with some half circles I cut from the reverse side of the pattern paper. I inked the half circles and the edges of the block with the blue ink from this trio, and used Sparkle Fibers for the dot over the "i" just for fun, adhering it with Glue Gloss. I then cut additional circles to use as page breaks and inked them with USA ink pad.
Holding my pages flat together, I "kissed" the pages to my USA ink pad and moved it along until I had all pages covered. This just added a nice finished look to the journal.
I tied some ribbons and twine to the binding just to finish it off.
Your next stop is Tami Sanders blog.
USA Ink Pad
Sparkle Fibers http://www.clearsnap.com/products.cfm/77/Sparkle-Fibers
Glue Gloss http://www.clearsnap.com/product.cfm/2050/Glue-Gloss
Pattern paper: Bo Bunny
Die cuts: Cricut Expression
Twine: The Twinery
Memo Book: Office Supply
Today's challenge is very easy.....we want you to make a BOX!
Starting with an 8"x8" piece of cardstock or heavy pattern paper, I scored the paper at 1", 3", 5" and 7". Then I turned the paper 90 degrees and scored again at 1", 3", 5" and 7". Once that is done, cut away all but the center square on each side.
Turn paper on an angle and score the corners diagonally, then fold on all score lines.
Add score tape to the 1" flaps. As you fold the box together, the flaps will fold inside to hold the box shape. Add a 1" strip of cardstock around the top of the box and the sentiment and you've got a cute little gift box to work with.
These little guys measure 2"x2", andd are so quick and easy to make. How about using them as table decorations for the upcoming holidays, filling them with candies or other little goodies for friends and family.
Score tool: Scor-pal
Pattern paper: Basic Grey
Ink: Clearsnap Destinations
Stamp: Hero Arts
Dies: Spellbinders, Nestabilities
Embossing Powder: Clearsnap
Imaginisce – Come One! Come All! Paper
Imaginisce – Step Right Up Paper
Imaginisce – Hot Buttered Popcorn! Paper
Gift card holder: Bare Elements
Circle Cutter: Kreaxions
Using the Circle Cutter and Punch 913 I created a fabulous new look for my calendar.
Very simply, I remvoed the calendar from it's plastic covering, added red dotted pattern paper which was mounted on white cardstock atop the calendar, used Punch 913 (without the inserts) to create a border strip, then used the Circle Cutter to cut the white and black circles large enough to fit my die cut letter.
Can you see how versatile these punches are!!!!!
I printed the year on my computer, inked the edges and placed it on top of the punched edge before adding the circles. Then I added a little bling. Since my bling was clear, I used Clearsnap's Smooch Ink to color the bling.
This was one very quick, very easy and fun project to create.
Circle Cutter, Punch: Kreaxions
Ink: Clearsnap Smooch Siren Ink
Clearsnap Archival Black Ink
Pattern paper: Doodlebug
Pattern paper: October Afternoon
Cricut: Happy Hauntings carridge